Technical Characteristic and Function:

Ø  Introducing German advanced technology to produce the torque box, with high precision reverse transfer force and strong reliability;

Ø  The third roller controls cutting off the machine, to avoid tyre wearing;

Ø  Can inspect automobile, motorcycle;

Ø  With European mode, the roller diameter is Ø180 or Ø245mm;

Ø  Advanced tacky sand process in roller surface, attachment coefficient is above 0.82 when both in dry and wet status, using lifetime is more than 200,000 times;

Ø  The high quality and precision sensor is got the ISO9002 Quality System Certification ;

Ø  High precision inspection, good repeatability, the brake force indication error<1.5%;

Ø  Strength desk with high quality bending armor plate, without foundation bolt installation.

Main Technical Parameter:      TLQMZF-10 

Max. allowed axle-load mass:     10000kg

Test range of brake force:           2× (0~30)KN + 1× (0~9)KN

Wheelbase (in/out width):            700/2700mm

Inspection speed:                         0.25km/h

Roller diameter × length:             2×(Ø245 × 1000) + 1×( Ø180×260)mm

Motor power:                                 2 × 4kw